Physical Adsorption + Smart Cycling<\/b><\/p>\n The i10 uses a molecular sieve to adsorb moisture from the air inside the cabinet. Its smart cycling system releases collected moisture and restores adsorption capacity automatically, providing continuous humidity control between 10% and 45% RH.<\/p>\n In testing, PETG stored in the i10 decreased from 0.34% to 0.21% moisture content after 96 hours, while PETG exposed to open air increased from 0.35% to 0.39% over the same period.<\/p>\n This creates a stable, low-humidity environment for long-term filament storage without relying on continuous high-temperature drying.<\/p>\n 10-Spool Storage, Stackable Design<\/b><\/p>\n The i10 stores up to 10 \u00d7 1 kg filament spools and supports spool sizes from 0.25 kg to 5 kg.<\/p>\n Multiple i10 units can be stacked vertically to save floor space, with stacking up to three units recommended.<\/p>\n A sealing gasket and three strong magnets help keep the cabinet tightly closed and maintain a stable storage environment.<\/p>\n Built for Long-Term Storage<\/b><\/p>\n The i10 consumes approximately 0.23 kWh\/24h* and operates below 30 dB, making it suitable for continuous use in homes, studios, workshops, and print rooms.<\/p>\n Its integrated design requires no complicated installation. Users can simply set it up, load the filament, and let it maintain the storage environment.<\/p>\n *Tested at 25\u00b0C and 60% RH in an empty chamber. Actual results may vary. <\/i><\/p>\n Multiple Safety Protections<\/b><\/p>\n For long-term operation, the i10 combines hardware temperature protection with intelligent software monitoring. If excessive temperature is detected, the system provides a real-time warning.<\/p>\n Beyond filament, the i10 can also provide low-humidity storage for other moisture-sensitive items, such as camera lenses, electronic components, tools, and collectibles<\/b>.<\/p>\n Availability<\/b><\/p>\n The SUNLU \u00d7 INSLOGIC FilaDC i10\u00a0<\/span>will be available for pre-order beginning:<\/p>\n September 15, 2026, at 7:00 AM UTC About SUNLU<\/b><\/p>\n Founded in Zhuhai in 2013, SUNLU is a global 3D printing brand specializing in filaments, resins, and accessories. With 270+ production lines, 25 million+ products sold, and 530+ intellectual property rights, SUNLU continues to advance 3D printing through product innovation, quality, and accessibility.<\/p>","protected":false},"excerpt":{"rendered":" <\/p>\n The new FilaDC i10 combines active dehumidification, 10-spool storage, low energy consumption and quiet operation to help maintain a stable, low-humidity environment for filament storage.<\/i><\/p>\n FRANKFURT, Germany<\/span>, Sept. 10, 2026<\/span> \/PRNewswire\/ — SUNLU and INSLOGIC are introducing the FilaDC i10 Filament Dehumidifying Cabinet<\/a>, a new long-term storage solution designed to help 3D printing users protect filament from moisture between prints.<\/p>\n![\"\"](\"https:\/\/mmx.prnasia.com\/media\/MS1983227\/20260908013710EDT_image_1.jpg?id=OA2934509&p=medium600\" "\\"\\"")
<\/a>
<\/span><\/p>\n<\/div>\n
<\/b>Pre-order:\u00a0[https:\/\/bit.ly\/4gGV5lb<\/a><\/span>]<\/p>\n